Hardware Connection
1
Package Contents
Wall Socket
Wall Socket
Internet
Quick Installation Guide
Cable/DSL Modem
300Mbps High Power Router
WPS/
RESET
4
3
2
1
INTERNET
POWER
TL-WR841HP
Power Adapter
WPS/
RESET
4
3
2
1
INTERNET
POWER
5
4
3
2
1
2
3
4
5
Ethernet Cable
Resource CD
Power oꢁ your modem.
Connect the INTERNET port on your router to the modem’s LAN port with an Ethernet cable.
Connect your computer to one of the ETHERNET ports labeled 1~4 on the router with an Ethernet cable.
Power on the modem and wait for one minute .
300Mbps High Power Router
Plug the provided power adapter into the POWER jack on the back of the router and the other end to a standard electrical wall socket.
MODEL NO. TL-WR841HP
QIG
MODEL NO. TL-WR841HP
Conꢀguration for Windows with Setup Wizard
If you are using a MAC/Linux or a windows computer without a CD drive to run the mini CD, please refer to Appendix 1 for configuration.
2
Insert the TP-LINK Resource CD into the CD-ROM drive.
After conꢀrming the hardware connection and the status
of LEDs, please click NEXT to continue.
Select the connection type your ISP provides and click NEXT.
Here we take Dynamic IP for example.
You can rename your wireless network on this page.
The default wireless name is TP-LINK_XXXXXX. Click
NEXT to continue.
1
3
5
7
Select TL-WR841HP and click Easy Setup Assistant
.
After the connectivity is checked successfully, please click
NEXT.
If you are utilizing a cable modem to access the Internet,
you may need to clone your MAC address.
You are recommended to select Most Security
(WPA2-PSK) to secure your wireless network.
2
4
6
8
The Router is
pre-encrypted.
The default wireless
password, the same
as the PIN code, is
printed on the label
at the bottom of the
Router.
(To be continued)
7106504243 REV1.0.0
|