Winegard Car Satellite TV System MA1055W User Manual

®
WINEGARD  
®
MOTORIZED SENSAR ANTENNA  
Models MA1055W & MA1055G  
MADE IN U.S.A.  
U.S. Patents D500,496 and 7,358,909  
INSTALLATION MANUAL  
CAUTION: This system is not for use with antenna in raised position  
while vehicle is in motion.  
OEM Model MA1055W has white antenna head and white turret.  
OEM Model MA1055G has gray antenna head and black turret.  
Unit packed as follows:  
Motorized Mount with booms attached.  
Antenna Head  
Hardware Bag  
Instructions  
Power Cable (Sold separately, CL-MA03)  
Control Cable (Sold separately, CL-MA06)  
Control Panel (Sold separately, MA-CP4W (White), MA-CP4B (Black))  
Read Installation Instructions before installing unit.  
Read Motorized Sensar Operation before operating unit.  
1
Pre-Installation Requirements  
To install the Winegard Motorized Sensar antenna, check  
with your RV dealer or manufacturer. Your RV may already  
be pre-wired for this system, and/or may have a reinforced  
roof area available.  
Roof Edge  
FIGURE 3  
c
d
10 inches  
Min.  
STEP 1: Choose location for antenna system on roof area.  
Figure 3 illustrates placement of system, showing it in travel  
position. You must be able to raise and rotate antenna  
withoutinterferingwithotherroof-mountedequipment.When  
selectinglocation,keepinmindhowyouwillroutethecables  
to and from mount. Beware of any obstacles in roof area  
thatmayinterferewithorbedamagedduringinstallation.  
e
f
2 Feet  
Min.  
STEP 2: Choose location inside RV for mounting control  
panel.Itisrecommendedthatthecontrolpanelbeinviewing  
area of most watched TV so you can see TV picture to turn  
antenna to best picture reception for your area. A 12VDC  
power source must also be available.  
e
f
2 Feet  
Min.  
c
d
10 inches  
Min.  
Ø
52" Raised Operating Diameter  
66"  
13.5"  
33.5" Raised Height  
5.5  
3
Roof Installation  
STEP 1: Attach antenna head to booms shown in Figure 2  
using two pins and E-Clips found in hardware package.  
Fasten coax to antenna head. See Figure 2B.Tighten coax  
connection per instruction decal on antenna head.  
STEP 3: In traced triangular area for cables, drill a hole (1.5"  
to3"Dia.)inroof.Routecablesthroughrooftowhereyouhave  
selected control panel to be mounted. See Figure 4.  
FIGURE 4  
Drill hole 1-1/2" to 3"  
Diameter for Wires on Roof  
Leveling Bracket  
FIGURE 2  
Antenna  
Head  
(2) E-Clips  
(2) Steel Pins  
STEP 4: Place antenna system on your previously selected  
traced location, and fasten in place with mounting screws.  
Dependingonroofconstructionyoumayneedtodrillpilotholes  
for mounting screws. See Figure 5.  
Lift Tubes  
FIGURE 2B  
FIGURE 5  
Coax  
Connector  
Cable  
Connector  
STEP 2: Remove the three screws holding triangle-shaped  
cover with WINEGARD on it from antenna base. You will see  
acoaxcableandcontrolcable(approx. 6"long). Withantenna  
system positioned on roof trace the outline of the mount and  
alsotracetheinsidewalloutlineofcablearea. Setmountoffto  
the side of the traced area. (See figures 3 & 4).  
Don't get  
Sealant on  
Painted  
Turret Top  
O-Ring  
Mounting  
Screws  
FIGURE 3  
STEP 5: Make cable connections from wires on the roof, to  
wires in mount. Apply approved sealant around cable entry  
hole. Replace cover over cable area making sure O-Ring is in  
place. Then tighten the three cover screws. See Figure 5.  
Screws  
STEP 6: After antenna is secured to roof, apply approved  
sealant around edge of mount and over screw heads. NOTE:  
Consult RV manufacturer for approved sealant.  
4
Inside Installation  
Control Panel Installation  
STEP 1: Run control cable from roof mount to control panel.  
Do not connect to control panel at this time.  
STEP 4: Control panel can be mounted directly to surface  
providing surface has sufficient space behind panel for wiring.  
Should you be limited to space behind panel or choose not to  
have wires concealed behind control panel, you can use the  
surface mount box.  
STEP 2: Connect power cable to a fused 12VDC source. It is  
recommended that the power source is separate from other  
appliances, to avoid possible electrical interference. Do not  
connect wire to control panel at this time. Note: Orange wire  
supplied for optional "Antenna Up" warning. DO NOT  
connect it to a 12VDC power source.  
STEP5:Afterpreppingareatomountcontrolpanel, testfitting  
to make sure it fits in location correctly, and connect control  
cable and power wires to panel. Then secure panel to it's  
location.  
STEP 3: Run coax cable from roof mount to power source for  
antenna head preamplifier. Power source may be a powered  
12VDC video switch or wall plate power supply. Connect a  
second coax cable from power source to television.  
Refer to Operations Manual for instructions to raise,  
lower, and rotate antenna.  
Control Panel  
.625  
.875  
3.280  
3.674  
4.485  
4.564  
POWER CABLE CONNECTION  
CONTROL CABLE CONNECTION  
NOTE: SHOWN WITHOUT  
SURFACE MOUNT BOX.  
5
Warranty  
Returned units damaged in shipping due to improper packing will be charged to the dealer/customer.  
WINEGARD MOBILE PRODUCTS LIMITED WARRANTY  
(2 YEARS PARTS; 1 YEAR LABOR)  
WinegardCompanywarrantsthisproductagainstdefectsinmaterialsorworkmanshipforaperiodoftwo(2)yearsfromthedate  
oforiginalpurchase.Duringyearone(1)ofsuchwarranty,WinegardCompanywillalsopayauthorizedlaborcoststoanauthorized  
Winegarddealertorepairorreplacedefectiveproducts. Nowarrantyclaimwillbehonoredunlessatthetimetheclaimismade,  
CustomerpresentsproofofpurchasetoanauthorizedWinegarddealer(tolocatethenearestauthorizedWinegarddealer,contact  
Winegard Company, 3000 Kirkwood Street, Burlington, Iowa 52601, Telephone 800-288-8094 or visit www.winegard.com).  
CustomermustprovideproofofpurchasewithadatedsalesreceiptfortheWinegardproducttoverifytheproductisunderwarranty.  
If the date of purchase cannot be verified, the warranty period shall be considered to begin thirty (30) days after the date of  
manufacture.  
Ifadefectinmaterialorworkmanshipisdiscovered,CustomermaytaketheproducttoanauthorizedWinegarddealerforservice.  
Customermustprovideproofofpurchasetoverifytheproductisunderwarranty. IftheproductisbroughttoanauthorizedWinegard  
dealerforservicepriortoexpirationofyearone(1)ofthewarrantyperiodandadefectinmaterialorworkmanshipisverifiedby  
Winegard Technical Services, Winegard Company will cover the Winegard dealer’s labor charges for warranty service. The  
WinegarddealermustcontactWinegardTechnicalServicesinadvanceforpre-approvaloftheservice. Approvaloftheservice  
isatthesolediscretionofWinegardCompany.  
Alternatively,CustomermayshiptheproductprepaidtoWinegardTechnicalServices(locatedat3111KirkwoodStreet,Burlington,  
Iowa52601,Telephone800-788-4417).Customermustreturntheproductalongwithabriefdescriptionoftheproblemandprovide  
WinegardTechnicalServiceswithCustomer’sname,address,andphonenumber.Customermustalsoprovideproofofpurchase  
toverifytheproductisunderwarranty.Iftheproductisreturnedbeforetheexpirationofthewarrantyperiod,WinegardCompany  
will (at its option) either repair or replace the product.  
ThisLimitedWarrantydoesnotapplyiftheproducthasbeendamaged,deteriorates,malfunctionsorfailsfrom: improperinstallation,  
misuse,abuse,neglect,accident,tampering,modificationoftheproductasoriginallymanufacturedbyWinegardinanymanner  
whatsoever, removingordefacinganyserialnumber, usagenotinaccordancewithproductinstructionsoractsofnaturesuch  
asdamagecausedbywind,lightning,iceorcorrosiveenvironmentssuchassaltsprayandacidrain.ThisLimitedWarrantyalso  
doesnotapplyiftheproductbecomesunabletoperformitsintendedfunctioninanywayasaresultofthetelevisionsignalprovider  
making any changes in technology or service.  
RETURN AUTHORIZATION POLICY  
AReturnMaterialAuthorization(RMA)isrequiredpriortoreturninganyproducttoWinegardCompanyorWinegardWarranty  
Services under this warranty policy. Please call our Technical Services Department at 800-788-4417 or send an e-mail to  
[email protected] to obtain the RMA number. Please furnish the date of purchase when requesting an RMA number.  
EnclosetheproductinaprepaidpackageandwritetheRMAnumberinlarge,clearlettersontheoutsideofthepackage. Toavoid  
confusionormisunderstanding,ashipment(s)withoutanRMAnumber(s)oranunauthorizedreturn(s)willberefusedandreturned  
toCustomerfreightcollect.  
WINEGARDCOMPANYDOESNOTASSUMEANYLIABILITIESFORANYOTHERWARRANTIES,EXPRESSORIMPLIED,  
MADE BY ANY OTHER PERSON.  
ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING WARRANTIES OF FITNESS  
FOR A PARTICULAR PURPOSE AND MERCHANTABILITY ARE LIMITED TO THE TWO YEAR PERIOD OF THIS  
WARRANTY.  
Instatesthatdonotallowlimitationsonimpliedwarranties,ortheexclusionoflimitationofincidentalorconsequentialdamages,  
theabovelimitationsorexclusionsdonotapply.  
Somestatesdonotallowlimitationsonhowlonganimpliedwarrantylasts,ortheexclusionoflimitationofincidentalorconsequential  
damages, so the above limitations or exclusions may not apply to you.  
ThiswarrantygivesCustomerspecificlegalrights. Customermayalsohaveotherrightsthatmayvaryfromstatetostate  
SATELLITE RECEIVER WARRANTY  
Seemanufacturer’slimitedwarrantypolicy.  
WS-MOBWARREV2  
Rev.1/10  
6
Notes  
7
Printed in U.S.A. Winegard Company • 3000 Kirkwood Street • Burlington, Iowa 52601-2000 © Winegard Company, 2006 2452068 Rev.3 8/10  

Transcend Information Mobile Memory Card TS1GRMMC4 User Manual
Toshiba CAMILEO P10 User Manual
Sony XR C440 User Manual
Sony WM FX561 User Manual
Sony HVR V1E User Manual
Sony CCD TRV65E CCD TRV69E CCD TRV13E CCD TRV15E CCD TRV35E User Manual
Sony Camcorder TRV312 User Manual
Sanyo LNS W01Z User Manual
Samsung ST50 User Manual
Salton WC22RE User Manual